'This video will assist you with adjusting the handle bar post on the HOIST LeMond Series UT Upright Trainer if you have too much movement on the handlebar. To adjust the tension on the handle bar post, first, release the tension by lifting the yellow handle, then, loosen the screw securing the tensioner pin using a 3mm Allen key. Once the screw is loose, rotate the tensioner pin counterclockwise using a 6mm Allen key until you feel resistance on the handle Last, re-tighten the screw securing the tensioner pin using the 3mm Allen key. Lock the handle in place and make sure it has enough tension to prevent the movement on the handlebar assembly.'
Tags: hoist fitness , Product Support , LeMond Bike
See also:
comments